When you wake up and you realize that you are late for work. You quickly prepare yourself, hopping onto the vehicle seat and pressing the ignition key. The vehicle does not start, but you can hear the clicking and cranking sounds when you start the engine. Nothing worked out the few times you tried. Here you should be aware that your battery is dead. It always occurs when it is most inconvenient. Thus, you must learn how to jump-start a car, how a jumpstart service operates, the causes of dead batteries, and the warning indications.
Find out by reading on!
Looking for instant help with a dead battery? Call us right away!
The battery is one of your car’s most crucial yet long-lasting components, often lasting years. But sometimes your car’s battery keeps dying, and it does not work until you detect it. A car battery can expire for a number of causes, but the most common ones are corrosion, parasitic drain, malfunctioning charging systems, and leaving the lights on. It usually occurs with used cars.
That is why it is important to know what to do if your car battery unexpectedly fails. Getting it started can be accomplished in a number of ways, but using restart services is a practical way to get it moving again. Knowing what to do when your car’s battery fails is essential for any owner. The causes of the dead battery should be discussed first.
Find out how Roadlink Rescue can Jumpstart your dead battery
Reasons That Lead to a Dead Battery
The following are some common causes of dead batteries in vehicles:
- The charging system’s malfunction
- You forgot to turn off your headlights or interior lights.
- Even when a vehicle is shut off, electricity continues to drain due to a parasitic drain.
- The battery is old or in bad condition.
- When temperatures are high.
- You have loose or corroded battery connectors.
- You have taken too many short drives.
- Your car has not been used in a while.
Sings That Show Weak or Dead Car Battery
Using windshield wipers alone will reveal whether or not your battery is functioning. Your battery is either dead or on the verge of dying if they are moving more slowly than normal. To see if your battery is dead or weak, you can also turn on your external lights or bumper. There are numerous additional indicators of a dead battery. These include:
- At ignition, there is no reaction.
- Either the starter motor does not start or it cranks slowly.
- The engine starts, but it immediately dies.
- The lights and radio are not working.
- The check engine light turns on.
- A strange battery odor
- Misshapen battery
- Battery terminal corrosion or looseness
You might be interested in Easy Ways to Fix a Flat Tire
Dead Battery? Don’t Panic: Get a Jumpstart Service
Steps to Follow for Jump Starting a Car
Make sure you have all the tools you need on hand before you jumpstart a vehicle. These include:
- Jumper cables: Longer ones would be preferable.
- Mechanical Gloves: Disposable gloves are an essential requirement; however, additional safety precautions are required while working with heavy-duty gloves.
- A Flashlight: It can be kept in any part of the vehicle.
- Paper Coveralls: These should be kept to safeguard your hands and clothing.
- Owner’s Manual: It will help you along the way and can be found in the glove box of your vehicle.
Learn: When do you need a tow company?
Here are some steps to take to jumpstart your car.
Put Both the Cars on Neutral Mode
Make sure both vehicles are off before connecting the jumper cables. For your jumper wires to reach the donor’s vehicle, park these vehicles near one another.
Protect your Clothes and Hands
The first step is to use paper coveralls and gloves to protect your hands and clothing.
Open the Hood
After opening the hood of your automobile, you might need to let go of the latch. It is accessible by placing your fingertips beneath the hood’s slightly open section. Slide the liver once you have located it, then use it to support the hood while working.
Attach the Jumper Cables
Once you locate the battery after opening the hood, you will find two terminals on the battery: one positive (+) and the other negative (-). The positive terminal (+ or red) would be covered with plastic with metal beneath. Keep the jumper cables attached firmly to the terminal for a safe and smooth connection.
Don’t forget to turn off the car. First, connect the positive (red) clamp to the dead car’s positive terminal. Then attach the negative (black) clamp to the donor car’s battery. Then attach the final negative clamp on any metal surface (non-painted) anywhere near the engine of the car that is going to be jumpstarted (the dead car).
Start the Donor’s Car
Once the connections have been correctly connected, the donor car should be started for two to three minutes in order to charge the dead battery. Start the dead car after a few minutes of waiting. Wait a few more minutes and try again if your car is still not starting. As soon as the dead car starts up, leave it in start mode for a moment while you carefully unplug the jumper cables from the battery.
Take Your Car for a Short Drive
After your car starts up, drive it for a short while—roughly half an hour—to fully charge the battery so that it will function properly.
Still, Not Starting? Get a Jumpstart Service!
if you have made several attempts yet are still unable to start your vehicle. Do not waste your time trying again. To remedy your problem, simply give our experts at Roadlink Rescue a call.
Summing Up
After reading this blog, you should be aware of the causes of dead batteries. The indicators that your battery is weak or dead have been covered. Finally, the procedures for jumpstarting a car have been revealed.
Car problems can occur anywhere and at any moment, and they are frequently unexpected. To be safe, you must therefore arm yourself with the appropriate equipment and materials. We provide all kinds of roadside assistance services at a fair price, including jumpstarting and flat tire changes. Roadlink Rescue is a network of flatbed tow trucks and wreckers to help drivers in need.
Call us right away!